MODULATING CAPABILITY
The MS Series of steam generator has the capability of modulating its output in 150,000 BTU per hour increments. The modulating is done by steam line pressure, that is, as steam line valves open or close and pressure rises or falls the steam generator modulates-stages up or down to hold a constant pressure.

LOW BTU OUTPUT CAPABILITIES
The MS Series of steam generators have a low output of 550,000 BTU per hour. The ooutput can be directed through as little as three 1 inch valve openings.

SMALL BTU OUTPUT INCREMENTS
The MS Series of steam generators have output BTU increments of approximately 150,000 BTU per hour. This enables the steam generator to operate at an optimum steam pressure. Factory set to operate between 3 3/4 to 4 PSI.

FIXED GAS/AIR RATIO
The MS Series of steam generators uses a motor speed control in conjunction with a programable controller that controls 4 preset gas and water orifices that are turned on and off in binary progression. This produces 15 increments of 150,000 BTUs per hour with very accurate gas/air ratios.